Change in the number of frames that can be stored in a single folder・The maximum number of frames that can be stored in a single folder will be changed from 9,999 to 999 with Ver.4.20* or later.
If you are using a macOS computer to process recorded files in the SDXC memory card, make sure to follow the procedure below before upgrading the firmware.Follow the instructions in “II-2. If using an SDXC memory card with existing files or one thathas not been recently formatted:” in the article titled “Important notice for consumers processing FUJIFILM digital camera files using macOS” that was published on Feb. 2 in this web site and then format the SDXC memory card before using it.
NOTESPlease read this update after refreshing this page.
In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.The firmware upgrade is not required if its version is latest.
Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.Please use your camera and lens with the latest version of firmware.
If you don’t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.Firmware
Firmware update via the smartphone or a tablet.
The firmware of a camera paired with a smartphone can be updated via the smartphone and a tablet.The method of firmware update via a smartphone
Settings you have changed can be saved by FUJIFILM X Acquire and so on.
We would recommend you save the settings if you have changed them from default ones. For detail, visit the FAQ website.How to save and restore camera settings